Best radial drill press

 

What are the best radial drill presses in 2017?

 

If you don’t have time to browse through all the reviews and excellent buying advice prepared by our researchers, then this short paragraph should tell you everything you need to know about the best radial drill presses. By reading through the user feedback, expert reviews and reliability tests available, we discovered that the SHOP FOX W1670 is the absolute best you can find at the moment. If you are looking for a machine capable of angled drilling, you will find that this one does everything you have ever wanted and even goes beyond the call of duty. Its tilting table and headstock allows you to use the machine for a large variety of projects. With 5 different speeds that vary between 550 to 3,470 RPM, the machine is highly versatile, and the presence of the speed chart right under the belt guard will surely come in handy once you start working on a more complex project. The diameter range for this model is 34 inches, a feature that again, grants you plenty of leeway when working. If the SHOP FOX W1670 is temporarily unavailable, you should go for the RIKON 30-140 as it is almost just as good.

 

 

The most popular radial drill presses currently available

 

Models we recommendOur ratingPowerSpeed configurationBest featuresPriceBuy from:
RIKON 30-140
2.RIKON 30-140 Bench Top Radial Drill Press
A+1/3 HP motor5 speedsHead tilts:
45° right / 90° left;
7-3/4-inch by 7-3/4-
inch table;
3/8-inch spindle
$$$Amazon
SHOP FOX W1669
3.SHOP FOX W1669 1-2-Horsepower Benchtop Radial Drill Press
A1/2 HP motor5 speedsDrill chuck: 5/8";
Head tilts:
45° left / 90° right;
Tilting cast iron table;
$$$Amazon
Grizzly G7945
4.Grizzly G7945 5 Speed Bench-Top Radial Drill Press
B+1/2 HP motor5 speedsDrill chuck:
1/64-Inch-5/8-Inch;
Spindle travel: 3-1/4";
Tilting cast iron table
$$$$Amazon
SHOP FOX W1670
1.SHOP FOX W1670 1-2-Horsepower Floor Radial Drill Press
B1/2 HP motor5 speedsSpindle travel: 3-1/4";
Drill chuck: 5/8";
Head tilts:
45° left / 90° right
$$$Amazon

 

 

For the self-respecting do-it-yourselfer, drilling holes in wood, metal and a range of other materials becomes a more convenient and precise task with the best drill press that can be found on the market. A drill press provides more reliability for high-precision tasks compared to a typical handheld drill. It can also offer more power to cut through tough materials. With a stationary bit that gives accuracy and control, the operator can drill at perfect angles every time and also achieve uniformity in boring multiple identical holes. Versatility is assured with optional accessories, so you can confidently do shaping, grinding, buffing, mortising or sanding.

A

 

Buying guide

 

Machine Type Capacity

 

When you check out radial drill press reviews, you will notice that the throat depth corresponds to half of the machine’s size. The throat depth is a quantification of the distance between the column and the chuck. Twice of the throat depth is also the measurement designated as the swing. The swing determines the width of the material that the drill press can tackle. The quill stroke also determines the drilling depth you can achieve.

Floor-standing models usually measure 64.5 inches, providing a cutting depth of up to 34 inches maximum. A bench-top model typically comes with a swing of 31.5 to 34 inches, with a throat depth of up to 17 inches maximum.

 

 

Power and Speed

 

Investing in the best radial arm drill press enables you to optimize a machine that comes with a larger capacity, and this is where floor-standing models really stand out. Typically, a floor standing machine comes with a 1/2 horsepower motor, which is stronger and can offer a greater number of spindle speeds. This endows the machine with greater versatility, coming as it does with a maximum of five speeds varying from 550 to 3470 RPM.

A benchtop model is typically outfitted with either a 1/3 HP or ½ HP motor. Some models offer five speeds ranging between 620 to 3,100 RPM, while others offer variable speeds from 550 to 3,470 RPM.

 

 

Features

 

A radial drill press has a head that extends, giving you more than twice the swing of any standard drill press. This makes the radial drill press especially suited for unique applications despite it requiring a larger acquisition cost.

The table of this type of machine is generally made of durable precision ground cast iron, which is a characteristic of any Shop Fox radial drill press, as well as other brands. The work table can tilt anywhere from 45 to 90 degrees in either directions, with some models offering 45 degrees right and 90 degrees left, and others built to offer 90 degrees in both directions. A wide base keeps everything steady, and the head can move back and forth to accommodate wider stock sizes. Machine control and bit changes can be carried out easily, and cushioned grip quill handles allow comfortable operation.

 

Our recommendations:

 

SHOP FOX W1670

 

1.SHOP FOX W1670 1-2-Horsepower Floor Radial Drill PressVersatile enough to be used as a horizontal boring machine, the SHOP FOX W1670 is equipped with a tilting table and headstock that allow surfaces to be drilled and sanded at a variety of angles.

Capable of drilling right in the middle of a stock up to 34 inches in diameter, this radial drill press lets you extend the head in and out so you can lengthen the distance between the column and the drill chuck up to 17 inches.

The head can also be tilted 45 degrees clockwise and up to 90 degrees counterclockwise, enabling you to drill angled holes.

The slide and tilt feature lets you cut a line of straight or angled holes while eliminating the need to re-position the stock after each hole is completed, saving precious time.

With 5 speeds ranging from 550 to 3,470 RPM, the SHOP FOX W1670 is quite easy to set and adjust, with a speed chart conveniently mounted under the belt guard.

 

Pros

This floor radial drill press is powered by a robust ½-HP, 110-volt, single-phase motor that drives the machine to deliver five variable speeds for versatility.

This model provides a variable swing up to 34 inches to handle large materials efficiently while the pivoting head allows drilling at nearly any angle for complicated projects.

The drill chuck takes in drill bits varying from 1/16 inch to ⅝ inch to enable you to use a variety of materials and perform different drilling applications for exceptional versatility.

The work table comes with four adjustments to handle just about any drilling angle called for by the project itself, enabling you to change the rotation, height, angle, and distance from the column.

This model comes with five variable speeds from 550 to 3,470 RPM to handle a variety of materials and drilling applications.

 

Cons

The extended platform exhibits a bit of play when drilling metal, which is likely a means to compensate for the slow torque during such operations.

Click here to visit Amazon and get the best price for this product!

 

 

 

RIKON 30-140

 

2.RIKON 30-140 Bench Top Radial Drill PressBacked by a reliable two-year warranty, the RIKON 30-140 Bench Top Radial Drill Press also offers versatility with its five spindle speeds.

Choose between 620 to 3,100 RPM for a variety of applications, ranging from do-it-yourself tasks to professional ones.

The unique telescopic design offers the operator a greater number of options, whether you’re working in a home woodworking shop or a small commercial shop. Equipped with a 1/3-HP motor, the RIKON 30-140 Bench Top Radial Drill Press offers power and efficiency that no hand drill can match.

The head swivels to the right at 45 degrees and to the left at 90 degrees, a terrific feature when you have to perform angled drilling on balustrades for stair railings. The rotating table accommodates different-sized materials with ease.

Stability is ensured thanks to the 13-5/8-inch by 8-5/16-inch base. Changes from chuck arbors to end mill bits are always quick and effortless thanks to the M-T2 spindle taper.

 

Pros

Equipped with the versatility of five spindle speeds, this model handles a variety of professional and do-it-yourself workshop applications so you can perform different projects from the basic to the more elaborate.

The ⅓-HP motor powers the spindle to drill at speeds from 620 to 3,100 RPM so you can bore into different materials using the proper speed to make a clean hole.

The 34-inch swing allows you to drill a hole in the middle of a 34-inch stock diameter, for a choice of stock sizes from small to large.

To accommodate wider board widths, the machine’s drilling head moves back and forth as needed to drill at the exact spot.

The head bevels 90 degrees to the right and 45 degrees to the left, enabling you to drill into a variety of sizes, shapes, and types of stock at an angle to prevent wrong entry points that result in the wastage of materials.

 

Cons

The radial head does not come with bearings to make the adjustment smoother, according to one customer.

Click here and see what customers said about this product on Amazon.com!

 

 

 

SHOP FOX W1669

 

3.SHOP FOX W1669 1-2-Horsepower Benchtop Radial Drill PressBuilt to last, the Shop Fox W1669 1/2 HP 34-inch Bench-Top Radial Drill Press has the ability to drill wide stocks up to 34 inches in diameter.

This machine comes with a head that slides in and out to facilitate the increase of the distance between the drill chuck and the column to a maximum of 17 inches. Drilling angled holes or using the machine for horizontal boring is effortless due to the ability of the headstock to tilt from 45 degrees clockwise to 90 degrees counterclockwise.

The huge swing lets you bore to the center of your stock. The precision ground cast iron table is built to tilt to 90 degrees in both directions.

This radial drill press features a slide and tilt functionality, which lets you drill a line of straight or angled holes without having to re-align your stock after each hole is cut. The table is height adjustable as well, making the radial drill press a highly versatile machine that handles a lot of applications.

 

Pros

This 34-inch Bench-Top Radial Drill Press is able to cut a hole into the center of a stock having a diameter as big as 34 inches, which is suitable for furniture-making and other elaborate projects.

The tilting head and the beveling table allow you to drill at any angle entailed by the project so you are not limited to just straight hole cutting.

This model can also be used as a horizontal boring machine so as not to disturb the surface of the workpiece to prevent damaging it on the exterior aspect.

This power tool provides variable speeds of 550, 880, 1,520, 2,490, and 3,470 RPM so you can bore holes into different kinds of materials and not be confined to a specific type of stock.

The table bevels 90 degrees left and right so you can work on intricate projects that require drilling at an angle, or on irregularly shaped or different sizes of stock.

 

Cons

The radial movement is quite choppy, so there is a need to make adjustments very carefully to ensure consistency in them.

Click here to visit Amazon and get the best price for this product!

 

 

 

Grizzly G7945

 

4.Grizzly G7945 5 Speed Bench-Top Radial Drill PressThe Grizzly G7945 is a five-speed benchtop drill press that offers a large variable swing of up to 34 inches. It features a pivoting head that allows you to drill holes at just about any angle.

Genuinely versatile, the radial drill press is outfitted with a ½-horsepower single-phase, 110-volt motor, giving you the drilling power you need for any tough application that no hand drill can ever hope to match.

It features a JT-33 spindle taper, ensuring it will fit all drill chucks, making the machine highly versatile and dependable. Built with a precision-ground cast iron table, the Grizzly G7945 radial drill press comes with 5 speeds, allowing you to select the precise pace at which to perform any drilling application.

The table tilts 90 degrees both left and right, for precise angled drilling. The 8 5/8-inch by 9-inch table offers a reliable surface across which to position your work piece.

 

Pros

The precision-ground cast iron table provides a secure platform on which to position the workpiece for drilling, delivering the needed support to hold the stock in place.

The 3 ¼-inch spindle travel provides an easily managed and controlled lowering of the drill bit to the stock to prevent the bit from ‘walking’ away from the target.

The variable swing of 34 inches allows the use of this machine for drilling a hole in the center of large workpieces, so you need not worry that the drill bit will enter the stock at the wrong spot.

The pivoting head allows you to drill at nearly any angle, so you can perform elaborate projects using various sizes and shapes of workpieces.

The ½-HP, single-phase, 110-volt motor drives the JT-33 spindle to bore into a variety of materials for limitless project possibilities.

 

Cons

Owing to the minimum spindle speed on this model, it might not be suitable for handling metalwork.

Click here and see what customers said about this product on Amazon.com!

 

 

 

SHOP FOX W1670 (B001R23SOU)

RIKON 30-140 (B002FB74WY) SHOP FOX W1669 (B001R23SOA)

The into good Driven by a robust ½-HP, 110-volt, single-phase motor, this drill press runs with five variable speeds for versatility. It has a variable swing up to 34 inches to accommodate large materials. The pivoting head enables you to drill at virtually any angle, even allowing you to take on more complicated projects as needed. To further increase its versatility, this drill press has a flexible drill chuck that accommodates drill bit sizes from 1/16 to ⅝ inch for use on a variety of materials and drilling purposes. The height, angle, rotation, and distance adjustability of the work table expands the possibilities. Thanks to its five spindle speeds, this drill press can handle multiple do-it-yourself and professional applications to help you explore the possibilities of workshop applications. Work on basic to elaborate projects using this flexible machine outfitted with a ⅓-HP motor that drives the spindle to drill at speeds varying between 620 and 3,100 RPM, which lets you bore holes into different types of workpieces using the exact drill bit rotating velocity. Work on small to large stock with the 34-inch swing. The beveling head lets you handle angled hole drilling. Offering a 34-inch swing, this drill press enables you to handle intricate projects where large pieces of stock have to be drilled holes into. This machine cuts a hole at the precise center of a 34-inch diameter workpiece, which is very useful in furniture making. The beveling table and tilting head provide the exact means of drilling at an angle or into really large or irregularly-shaped material so you can explore your creativity as a craftsman. The unit can even serve as a horizontal boring machine when the surface of the workpiece has to remain immaculately undamaged.
The bad There can be a bit of play in the extended platform when you are drilling into metal so it is best to watch out for this. There are no bearings on the radial head to help in making the adjustment smoother, based on the experience of one customer. Adjustments need to be made carefully as the movement of the radial head tends to be quite choppy when doing quick alterations.
The bottom line This radial drill press delivers a remarkable drilling performance regardless of the complexity of the project and the material. Providing five spindle speeds, this drill press allows you to work on different types of drilling materials and applications. Delivering smooth, uniform results, this radial drill press combines its beveling table with the articulating head for an awesome versatility.

 

 

 

1 Star2 Stars3 Stars4 Stars5 Stars (9 votes, average: 4.67 out of 5)
Loading...