Best cordless jigsaw

Last Updated: 19.10.19

 

What are the best cordless jigsaws in 2019?

 

If you’re looking for the best cordless jigsaw but don’t have the time to do any extensive research, then the following paragraph should give you a quick suggestion for a highly capable product. After going through scores of cordless jigsaw reviews, we’ve settled on the DeWalt DCS331B as our top pick from what is currently available for sale. This received great appreciation for its high degree of functionality, as it can perform a wide variety of bevel cuts, with a  jigsaw that can lock to no less than four positions. It performs curved cuts equally well, with no less than four orbital adjustment settings. At a maximum speed of 3000 SPM out of a 20V motor, it is also one of the best performing cordless jigsaws out there. If you’re looking for something more affordable, then we recommend the Porter-Cable PCC650B.

 

 

Comparison table

 

The Good
The Bad
Verdict
Price

 

 

Buying guide

 

There are a lot of features to look for when considering what would make the best cord-free jigsaw for your needs, so deciding upon the right product could prove a daunting task, especially if you lack any familiarity with power tools. If this applies to you, we’ve prepared a short guide explaining the main characteristics of jigsaws below.

 

Motor and performance

 

Most cordless jigsaws on the market have either 18V or 20V motors, rated after the amount of maximum charge available in the battery. Both of these offer similar performance, with the 20V models providing a little bit more power while the 18Vs tend to be a bit more economical.

The most important specification regarding performance is the number of strokes the blade will deliver per minute, abbreviated in SPM. This can go as high as 3000 SPM for a good cordless jigsaw, which will be more than enough to handle any DIY project in either plastic, PVC, metal or wood.

 

 

Speed settings

 

Speed will need to be adjusted based on the material you’ll be working with, for example, soft plywood is best cut with fast blade action while metal will require slower speeds for maximum effectiveness.

That’s why it is important even for a cheap cordless jigsaw to have multiple speed settings, between 4 and 7 for most models, adjustable via the trigger for better convenience.

 

 

Orbital settings

 

These let you adjust the angle of motion the blade will perform, further contributing to the adaptability of the jigsaw for different types of material. The right type of motion will make cutting easier and less hard on the motor, extending the product’s overall life. This will also contribute to decreasing the wear on the blade.

 

 

Bevel settings

 

Similar to the function described above, some models allow you to tilt the blade at various angles on the vertical axis for delivering a continuous up and down motion for bevel cuts. You can typically expect to be able to cut at 0, 15, 30, 45 and 90 degrees, with a cheaper cordless jigsaw offering fewer options.

 

 

Convenience features

 

All cordless jigsaws should be outfitted with a dust blower for getting the debris out of the way. This increases the life of the blade but also the user’s comfort since splinters or chips won’t be thrown towards him.

Expect to replace the blade quite a lot, especially when working on metal, so it will be a good idea to look for a product that allows for quick blade changing, preferably without requiring any tools.

 

 

Our recommendations

 

The high number of products on offer might make finding the perfect cordless jigsaw for your needs a difficult task. To give you a hand we’ve selected a small number of top performing products, belonging to different categories in regards to both price and functionality, for your consideration.

 

 

DeWalt DCS331B

 

Pros

 

Very durable and reliable item, it’s been found to work well under extreme duress, and the whole of its front section is made of metal.

The lever-action blade attacher and the shoe bevel can both be operated without tools, which makes this very convenient as changing blades and blade angles are common procedures when employing a jigsaw.

It offers multiple orbital, bevel and speed settings in order to better adapt to any task.

The 20 V motor offers a significant degree of performance, driving the blade at a maximum of 3,000 SPM.

 

 

Cons

 

With so much of its construction employing metal, the DCS331B is not the lightest jigsaw out there, but between weight and durability, most people tend to prefer the latter.

Buy from Amazon.com for ($131)

 

 

Main features explained

 

Made by DeWalt, the DCS331B stands at the top of the line when it comes to cordless jigsaws, excelling in both performance, functionality, and reliability. It’s one of the preferred choices for professional contractors, but it might very well justify its cost for a regular handyman thanks to the long working life it should offer.

Its entire front section, including the lever-action keyless blade chuck, the keyless shoe bevel and a significant section of the casing, is made of metal and gives an impression of sturdiness and reliability which seems to be confirmed by actual results, judging by the feedback this product received.

The blade attacher and the shoe being keyless means you won’t require any tools for changing the blade or making the necessary angle adjustments for bevel cuts. It is specified that the shoe allows for the blade to be tilted to 4 positions: at 0, 15, 30 and 45 degrees, but it might be that the product also allows for free adjustment.

Otherwise, the DCS331B can be set to cover a wide range of working regimes. There are four orbital positions that govern the travel and longitudinal motions of the blade and a number of different speed settings, adjustable via the trigger for better convenience.

The blower this uses for removing debris from the cut area can also be set to deliver various amounts of force fit for either sawdust, plastic flakes or metal splinters that might otherwise be thrown too forcefully into the air.

With one of the most powerful 20 V motors out there, the maximum speed its blade will achieve is 3.000 SPM, sufficient for all but the most demanding of applications.

 

Buy from Amazon.com for ($131)

 

 

 

Porter-Cable PCC650B

 

Pros

 

An affordable but reliable product, primarily intended to meet the needs of the regular household user.

A high number of blade settings and features will make it perform well in a wide variety of applications. You will get three orbital settings for performing round cuts and the possibility to adjust bevel angles for wedge sections.

Trigger adjustable speed settings will further improve this product’s versatility, adapting it for both slow applications that involve metal sheets and fast ones on soft material like plywood.

Relatively good performance from a 20 V motor that can drive the blade to 2,500 SPM.

 

 

Cons

 

The blade has been found to be cantilevered too far from the shoe, and this might cause it to bend when going through hard material. This might affect its functionality if softer blades are used, but it shouldn’t be a problem with more rigid ones.

Buy from Amazon.com for ($59.98)

 

 

Main features explained

 

Every DIYer worth his or her salt should already be familiar with Porter-Cable, one of the American companies that decided to corner the very lucrative market of household power tools with affordable products that can withstand well enough to irregular use while offering a similar level of function and performance to the premium models preferred by professional contractors.

That should tell you enough about the “character” of the Porter Cable PCC650B 20 V cordless jigsaw, but what about its features and performance? As it would be expected, you’ll get most of everything you need from it, like three orbital settings to adjust the forward motions of the blade for various cutting applications and a number of bevel angles, between 0 and 45 degrees.

The last function is needed for cutting wedge sections in relatively thick material such as wood and will prove invaluable for furniture makers. To set the blade for different speeds, as demanded by the application, you will only need to adjust the pressure on the trigger, which is both straightforward and convenient.

The maximum speed that the 20 V motor can imprint upon the blade is 2,500 SPM, which might not equal that of premium models but it’s still enough for all but the most demanding household applications.

The particular item we’ve looked at comes as a bare tool, which might be convenient for those who already own items from the company’s 20 V MAX “system” since these all use the same Li-Ion batteries.

Another point of convenience is that the T-shank blade this uses can be replaced without the use of any tools once it gets too dull for the job.

 

Buy from Amazon.com for ($59.98)

 

 

 

Worx WX550L

 

Pros

 

One of the most important traits of this unit comes from the curve control technology that enables users to adjust the saw orbit in one of the four customized settings.

The new and improved wire guard helps users by increasing the accuracy when cutting the wood or any other material.

The 5-amp motor that powers the jigsaw is not only efficient but also very powerful and can be used to cut a wide range of materials.

Thanks to the addition of the keyless blade clamp, the blades are very easy to change.

 

 

Cons

 

Buyers have reported that the trigger is very sensitive and that even the slightest touch can start the blade moving.

When cutting thick materials, it can be difficult to hold the jigsaw steady.

Buy from Amazon.com for ($31.8)

 

 

Main features explained

 

The BLACK+DECKER BDEJS600C is a versatile and stable model that is designed with a curve control technology that will help users adjust the saw’s orbit into one of the four customizable settings. This will enable you to complete any project efficiently.

The same feature will also enable you to move the jigsaw in any direction as opposed to other models that are limited to only an up and down movement. Thus, your speed and precision will be increased, which will result in you becoming more efficient at work. The curve control technology is also quite useful when dealing with different materials.

Since the device is built with a 5-amp variable speed motor that can generate an impressive amount of 3000 SPM of cutting power when used at full capacity, you will get to enjoy increased performance and productivity. You will be able to cut wood quickly, efficiently, and accurately.

The power of the motor will also aid when working with hard materials, as even thicker types of wood will be cut easily. Since the motor switches to adequate strokes per minute depending on the workload, you will end up saving energy when compared to other models that have lesser amp variable power.

Safety is essential when operating any cutting tool and we were pleased to see that the BLACK+DECKER option comes with the new and improved guard technology that gives the user clear sight on the saw to ensure that the cut is straight and precise.

The wire guard will also help make it easier for users to position the blade without having to waste time checking if it hits the correct mark. This way, your work will be more convenient, and you will be able to save time since you will finish projects quicker.

 

Buy from Amazon.com for ($31.8)

 

 

 

1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...